|Place of Origin:||JAPAN|
|Minimum Order Quantity:||50|
|Payment Terms:||TT/WESTER UNION/PAYPAL|
Leisto's production compatible soldering tips have good performance such as accurate temperature control, smooth solder wetting performance. The great base copper & precise plating technology improves the thermal conductivity and reduces the temperature recovery time.
High quality Hakko soldering tips
T18-I Soldering Tip
Features of Hakko T18-I Soldering Tip
No.1 Brand new and top quality
No.2 Designed to meet lead-free soldering requirement
No.3 Replacement tips for soldering the different components of PCB
No.4 Good performance in tin-on and tin melting, solder joints uniform, and fluent soldering;
No. 5 with high anti-oxidation, good moist performance, quick thermal conductivity
Advantages of our brand new Hakko 900M-T- soldering tips
Must first clean wet sponge in water, then squeezed of excess moisture. Only in this way can make the tip to get the best cleaning results. If you use a non-wetting cleaning sponge tip will lead to damage to the tin.
First temperature to about 250 ° C, and then clean the tip, coupled with a new layer of tin for protection. (If you use a non-temperature soldering iron, the first power cut off, so that the tip temperature slightly lower after the tin.)
High temperature will accelerate oxidation, reduce tip life.
When soldering, do not put pressure on too large, otherwise it would damage the tip deformation. As long as the tip can fully contact pads, the heat can be delivered. Also choose the right tip can also help heat.
This can reduce the chance oxide tip, so the tip is more durable. After use, the tip temperature should be slightly lower after adding new solder, tin-plated layer to make better oxidation effects.
If the head of a black iron oxide, iron head it may not be on the tin, then must be cleaned up immediately. When cleanup first tip temperature to about 250 ° C, and then clean sponge to clean the tip, and then on the tin. Repeated action until the oxide to clean up.
Active high or corrosive flux will accelerate corrosion when heated tip, it should be used in low-corrosive flux
When without the use of electric iron, electric iron should be carefully placed in the appropriate iron shelves, lest tip from impact damage.
Select the correct tip size and shape is very important to choose the right tip can work more efficiently and increase the durability of the tip of the degree. Choose the wrong tip soldering iron can affect maximize efficiency, welding quality will therefore be reduced.
When you need to replace the tip, select and confirm the original Hakko tip tip models. If you are using non-genuine Hakko tip or tip models do not match, it will affect the performance of the original soldering iron and damaged heater and circuit boards and other components.